Unmanned combat series
0102
Unmanned Aerial Vehicle (UAV) Individual Soldier Detection & Early Warning Device
Product Appearance
Product Introduction
The market prospects for unmanned aerial vehicles (UAVs) are vast. Small-sized UAVs can be widely used in various fields such as aerial photography, agricultural crop protection, disaster prevention and reduction, search and rescue operations, traffic monitoring, resource exploration, remote sensing mapping, border patrol, and meteorological detection. However, the lag in UAV control methods has led to difficulties in regulating and holding accountable for many unauthorized flights ("black flights"). This has created a growing demand for UAV detection and countermeasures.
This product adopts a software-defined radio (SDR) solution to analyze the spectrum characteristics of UAV/quadcopter flight control signals and image transmission signals, enabling detection and identification of unmanned aerial vehicles. The single-station direction finding technique can monitor and calculate the azimuth information of the UAV, while the received signal strength is used to roughly estimate the distance to the UAV. The multi-station time difference positioning technique can calculate the position information of the target based on the signal delay relative to multiple receiving stations. Additionally, by utilizing the wireless "fingerprint information" of the UAV, a UAV blacklist and whitelist can be created, enabling precise identification and providing warning alerts for UAVs.
Technical Features
1.This product utilizes an SDR solution based on FPGA+ RF Transceiver, offering a wide frequency range coverage from 700MHz to 6GHz. It supports the frequency bands commonly used by UAVs and quadcopters for image transmission. With a reception sensitivity of -105dBm, it can detect signals from distances of over 1.5 kilometers.
2.The product features automatic detection upon power-up and can differentiate between UAVs and quadcopters. It provides audible alerts, visual alerts through lights, and vibration alerts. The number of light flashes indicates the signal strength of the detected UAV/quadcopter. It also has a silent mode that can be activated or deactivated using a knob switch. The frequency and signal strength information of the UAV/quadcopter can be uploaded through the Ethernet port.
3.This compact device is a handheld UAV/quadcopter detection equipment. It has a battery working time of 4 hours and supports simultaneous charging and operation. It can be charged with a wide charging voltage range of 5-15V.
Main Functions
1.Promptly detect nearby UAVs by detecting the electromagnetic spectrum signals of UAVs in the range of 700MHz to 6GHz.
2.The detection radius is greater than 3000m, although the exact range may vary depending on the electromagnetic intensity of the environment and the altitude of the aircraft.
3.This device can accurately provide audible, visual, and vibration alerts for commonly used civilian UAVs, including quadcopters, fixed-wing aircraft, DIY models, and FPV (First Person View) racing drones. It can also partially identify certain models of UAVs.
4.The equipment needs to consider harsh working environments and ensure normal operation in high humidity, high and low temperature environments. It operates within a temperature range of -40°C to 55°C.
5.The equipment needs to consider long working hours, with a minimum working time of 4 hours when using a lithium battery and a minimum working time of 2 hours when using a low-temperature battery.
Technical Parameters
1.Frequency band receiving: 700~1500MHz、2400~2485MHz、5150~5950MHz (it supports frequency hopping and can perform a full-band scan from 200MHz to 6GHz.)
2.Receiver sensitivity: less than -113 dBm/1MHZ
3.Full frequency band scanning time: less than 0.5 second.
4.Equipment/Device power: less than 7W
5.dentification type: DJI full series, mainstream 2.4GHz and 5.8GHz video transmission quadcopters (FPV).
6.Lithium battery group: 8.4V/3.5AH (Low-temperature battery: 8V/1.7AH.)
7.Battery duration: 4h (dual battery)
8.Appearance size: 200*82*30mm (excluding antenna)
9.Protection level: IP67
10.Antenna specification: receiving frequency band of 700 MHz to 6 GHz, and the omnidirectional antenna has a gain of 2-6 dBi, the antenna size is 180x18x16mm.
11.Equipment NW:less than 600g.