Leave Your Message
CH-2024-2 UAV/Drone Individual Soldier Detection and Early Warning & Location Device

Products

CH-2024-2 UAV/Drone Individual Soldier Detection and Early Warning & Location Device

    Functions

    1.By detecting the electromagnetic spectrum signals from 70MHz to 6GHz of the neighboring drones, it can detect the surrounding drones in time.
    2.The detection radius is more than 3000m (depending on the electromagnetic strength of the environment and the height of the aircraft).
    3. It can accurately realize sound, light and vibration alarms and conventional model identification for commonly used civil drones, including quadcopters, fixed-wings, DIY, FPV drones and so on.
    4. The device supports harsh working environment, working temperature -40° to 55°.
    5. The equipment uses lithium battery, working time is not less than 4hrs, low temperature battery working time is not less than 2 hours.

    Technical parameters

    Receiving frequency band:70 ~300MHz, 300~700MHZ,700~1500MHz, 2400~2485MHz, 5150~5950MHz
    Display screen:2.4”,display the frequency and signal strength detected
    Receiver sensitivity:less than -110dBm/1MHz
    Full band scan time: less than 5s, FPV scan time less than 1s
    Equipment power consumption:less than 7W Recognition type:DJI、AUTEL(daotong) and other full series、mainstream 1.3GHz、2.4GHz、5.8GHz and other frequency band FPV drone.
    Li-ion battery pack:11V/3.5AH(low temp battery 11V/2.6AH)
    Endurance: 4 hrs (support rechargeable backup battery)
    Appearance size:174×78×39mm (exclude antenna)
    Protection grade:IP67
    Antenna specification:receiving band 70MHz~6GHz Omni-directional antenna gain: 2-6dBi antenna size: 315*16mm
    Directional Antenna Log Periodic Antenna Gain 7dBi 70MHZ~6GHz
    Net weight:less than 600g

    Interface instructions

    DCBCFC~1okg
    1. The antenna interface is TNC female socket, can be connected to 70MHz-6G omni-directional antenna, can also be connected to the directional antenna as a drone direction detection use.
    2. Power switch clockwise rotation for power on, step by step rotation for adjusting the alarm volume from small to large.
    3. Function step knob, tentatively set to vibration control switch, direction-finding page function control key.
    4. Data interface, to provide equipment TCP / IP data communication interface; RS232 interface; external 15V power supply input interface.

    Screen Instructions Starting up

    46723A~19m8
    UAV Indicates drone signal, frequency, intensity (0-100)
    FPV Indicates FPV drone signal, frequency, intensity (0-100)
    Battery level indication
    Vibration function switch indication
    Alarm volume display
    Direction detecting mode indication
    7j39